The same is mud, adults have the same way of playing as adults, such as mud ATV. As the first equipment for this very exciting entertainment project, here we recommend four all-terrain vehicles (ATV) that are good at playing in the mud. 　　

The visual effect of the 2014 YFZ450R Sport ATV does not look very different from the 2013 model. However, the inner core of the 2014 YFZ450R Sport ATV has undergone earth-shaking changes. The 2014 new car has a stronger power system and better handling performance. In terms of details, the YFZ450R Sport ATV also uses a more user-friendly design, making driving and handling easier. After changing the engine camshaft angle, compression ratio, modified ECU settings, equipped with 42mm Mikuni throttle, retuned suspension system and new Magis tires 21 inches in the front and 20 inches in the rear, Yamaha once again upgraded the YFZ450R The performance standard of Sport ATV.

The rise of all-terrain vehicles can be followed in the 1970s. Honda, Suzuki and Yamaha of Japan developed a variety of all-terrain vehicles suitable for sports and leisure. All-terrain vehicles were immediately welcomed by sports car racers and farmers in the United States. With North Star, Bombardier and other North American companies entering this industry closely, all-terrain vehicles are widely used in more areas. According to the all-terrain vehicle standards formulated by the National Four-wheel All-terrain Vehicle Standardization Technical Committee, all-terrain vehicles can be divided into electric all-terrain vehicles and internal-combustion all-terrain vehicles according to the driving power type; terrainVehicle, referred to as ATV), multi-functional all-terrain vehicle (UtilityAll-terrainVehicle, referred to as UV or UTV) and entertainment venue vehicle (Go-kart).

The engine and transmission are installed in the front compartment, and the transmission is connected to the two-stage reduction gearbox through a shaft, and the disc brake is also installed on this shaft. The power is transmitted to the side drive at the front end of the chassis through the cardan shaft. The steering is realized by changing the direction between the front and rear carriages with the help of two hydraulic cylinders, and is servo controlled by an ordinary steering wheel. The design of the hydraulic system allows a lot of freedom between the two carriages. Each assembly has 4 pairs of road wheels, the front end is equipped with driving wheels, and the rear end is equipped with inducers.

The road wheel is installed on a trailing arm supported by a rubber tension spring and connected with a steel beam. The induction belt tensioner at the rear end is also supported by rubber springs. The track is made of rubber with longitudinal fiber cord and integral steel molding reinforcement. It has been used by the Swedish Army under different conditions all year round, and its life span exceeds 10,000km. It is made of fire-resistant glass fiber reinforced plastic (GRP) and adopts a double-layer structure. It is not only sturdy and durable, lighter than the steel carriage, but also has the function of preventing rollover. The design of the car can ensure that it can still be started when the ambient temperature is lower than -40°C.

As we all know, many components or attachments of vehicles are dangerous by sea: the fuel in the fuel tank is classified as Class 3 dangerous goods; the battery is classified as Class 8 dangerous goods; the airbag is classified as Class 9 dangerous goods... Then the transport vehicles transportation involves The treatment of the relevant components with dangerous properties of maritime transportation naturally determines the classification of the whole vehicle transportation and the adoption of transportation methods.1000-1

As we all know, the crawler walking of the tank is like laying an infinitely extended track for the tank, so that it can smoothly, quickly and safely pass through various complex road conditions. Due to the large grounding area, the tank is increased on soft tracked carrier and muddy roads. The passing ability reduces the amount of sag. Because the track shoes have patterns and can be installed with thorns, they can firmly grasp the ground on the roads such as rain, snow, ice or uphill without slipping.
The track is a flexible link driven by the driving wheel, surrounding the driving wheel, the load wheel, the induction wheel and the support belt wheel. The track is composed of track shoes and track pins.

The steering performance of tracked vehicles is one of the important evaluation criteria in its comprehensive performance indicators. There are many ways to turn tracked vehicles. There are generally three steering methods for common tracked vehicles:
　

Tracked Carriers are revolutionary and versatile carrying machines with huge capabilities and many uses. With the ability to carry heavy loads that would usually require multiple persons or re-designed access, Tracked Carriers are the cost effective material transporting solution that replace excessive man power and reduce the need for manual handling. Typical features include-

The robot tracks block is divided into natural rubber, EPDM rubber, rubber, silicone rubber, styrene butadiene rubber, neoprene with silicone (half), tendon rubber (beige red), natural rubber (black and white) and other materials. Made of metal fixed plate. The rubber track block is mainly used for the plastic extrusion auxiliary machine (traction machine) of profiles, pipes, sheaths and other products. The abbreviation of the track rubber block is: mainly used to fix the chain with screws. The chain rotates with the drive sprocket and traction The rubber block also drives the product along with the chain to achieve the purpose of pulling the product.

Rubber track with wide range size